產品介紹：

采用進口件、原裝旋梭、低唱膏、線跡穩。
使用日本進口齒輪， 間隙小、醺青低、運轉平穩、傳遞精確。
進口針捧架材質好、精度高、耐磨性強、強度好，使針?biāo)さ贯樂€(wěn)定性得到提高。
高強度的進口同步齒形帶， 傳遞力矩大，過厚能力強， 在過厚7mm時不跳針、不斷線。

Product Introduction：

 Imported parts and original revolving shuttles are adopted ,where low noise and stable seams are generated.
Gears are imported from Japan with small gap, low noise, stable operation and precise transmission
The needle bar is improted with good material , high precision , strong abrasion capability and high strength so as to improve the stability of needle bar.
The imported high-strength synchronous gear belt has big transmission moment,strong thick material penetration capability, with no jumper or breakage when sewing on 7mm-thick materials.